Choosing the right safety valve for a gas stove or range is essential for reliable ignition and secure operation. Below are five well-matched options that align with common model numbers and OEM references. Each product section includes a link to the seller, an image, and key features to help you compare at a glance.
Summary Table
| Product | Brand | Model Fitment | Key Note |
|---|---|---|---|
| Gas Range Oven Safety Valve for Electrolux 3203459 | Krooli | Electrolux 3203459 AP2131109 PS446204 Y-30128-35 | |
| Robertshaw Gas Stove Range Oven Safety Valve NC-4125-5 | Awoco | NC-4125-5 Y-30128-128 | |
| Supplying Demand 3203459 Valve Replacement | Supplying Demand | 3203459, AP2131109, Y-30128-35 | |
| Y-30128-128 Range Valve by FENDITEK | FENDITEK | NC-4125-5 Y-30128-128 | |
| Supplying Demand WB19K31 183D5746 | Supplying Demand | WB19K31, WB19K0031, Y-30128-7AF |
Gas Range Oven Safety Valve for Electrolux 3203459
Features: Replacemen for Frigidaire 77411170010, Tappan 774T117P10, Gemline GR5326, Electrolux 3203459 AP2131109 PS446204 Y-30128-35, Made by Same OEM manufacturer.
Robertshaw NC-4125-5 Gas Safety Valve for Awoco
Features: Voltage 3.03VAC to 3.3VAC; suitable for 3.03/3.3 VAC at 60Hz. Do not apply 120 VAC. Includes guidance to measure voltage, ensure igniter operation, and safe disconnection when servicing. Helps ensure igniter conformance before gas flow.
Supplying Demand 3203459 Valve Replacement
Features: Model numbers include AP2131109, 300, 316066400, 3201101, 3131449, 77411170010, 774T117P10, AH446204, EA446204, PS446204, Y-30128-35. Electrical rating 3V AC @ 3.3-3.6 A. 3/8 inch inlet, 1/4 inch terminals. Emphasizes proper disconnecting, ignition amperage requirements, and leak checks after installation.
Y-30128-128 Valve by FENDITEK
Features: Voltage 3.03VAC to 3.3VAC, 60Hz; NG and LP applicability; gas pressure 0.5 PSI. CSA approved. Specifications show resistance between connectors around 1.1 to 1.4 ohms. Model NC-4125-5 Y-30128-128. Not repairable as a safety valve.
Supplying Demand WB19K31 183D5746G001
Features: Model fitment information at page bottom; Alternate numbers include AP2022762, 247066, AH233885, EA233885, PS233885, Y-30128-7AF, WB19K0031. Electrical ratings 3.0/3.3 VAC, 60 Hz, includes mounting brackets. Emphasizes proper disconnection and leak checks after servicing.
Buying Guide: Key Purchase Considerations
- Model compatibility: Match the exact valve model and compatible brand series (for example, Electrolux, Awoco, or GE variants) to ensure proper fit and safe operation.
- Electrical requirements: Check voltage (commonly 3.03–3.3 VAC) and current (amps) ratings. Using the incorrect electrical spec can prevent ignition or cause failure.
- Gas type and pressure: Verify whether the valve supports natural gas or propane, and confirm the supported gas pressure (for example, 0.5 PSI for some models).
- Safety and certifications: CSA or other safety certifications indicate compliance with safety standards and may affect suitability for certain appliances.
- Installation considerations: Many valves require proper disconnecting of power and gas, leak testing after installation, and adherence to manufacturer instructions to maintain safety.
- OEM vs compatibility: OEM-referenced replacements often align best with original performance, while compatible models can offer cost savings but require precise specification checks.
- Maintenance and troubleshooting: Look for notes on igniter amperage, igniter glow behavior, and troubleshooting steps to diagnose ignition flow issues.
- Warranty and support: Prefer parts with clear warranty terms and accessible customer support in case of fitment questions or performance concerns.